Branson 2910/3510
Synchro Shuttle Transmission Compact Tractor
The 12 forward/12 reverse transmission gives you four gears in each of three ranges. A synchronized reverser is standard to make repetitive forward-to-reverse loader work faster.
Jump to:
Dimensions
Weight
Engine
Steering
Clutch
Brakes
Transmission
Tires
Hydraulics
Standard Equipment
- Hydrostatic Steering
- Differential Locak
- Wet Disc Brakes
- Hand & Foot Throttles
- Headlights
- Adjustable Spring Suspension Seat
- ROPS and Seat Belt
- Safety Lights
- Rear Working Light
- Adjustable Drawbar
- Overriding Clutch
Optional Equipment
- Front weights
- Rear wheel lights
- Block heater
- Front weight frame
- Canopy
- Single or double-spool remote hydraulics
Specifications
Branson 2910 Dimensions
| Overall Length |
119” / 3040mm |
| Overall Width |
58.3” / 1480mm |
| Overall Height |
96” / 2423mm |
| Wheelbase |
65” / 1650mm |
| Tread Front |
48.6” / 1235mm |
| Tread Rear |
46.9” / 1190mm |
| Ground Clearance |
11.2” / 285mm |
Branson 2910 Weight
| Weight |
2910: 3700 lbs. |
| 3510: 3749 lbs. |
Branson 2910 Engine
| Type |
Vertical, 4 cycle water cooled diesel naturally aspirated |
| Combustion system |
Indirect injection |
|
Engine Output
Manufacturer's estimated Hp/rpm
|
2910: 29/2600 (25 PTO) |
| 3510: 35/2600 (31 PTO) |
| Cylinders |
3 |
| Bore × Stroke |
2910: 84 × 88 |
| 3510: 88 × 94 |
| Displacement |
2910: 1461cc |
| 3150: 1714cc |
| Compression ratio |
21:1 |
| Type of air cleaner |
Dry, single element |
| Fuel tank capacity |
10.4 gallons |
Steering
| Type |
Hydrostatic |
Transmission
| Drive System |
4 wheel drive |
| Main shifting |
Synchromesh |
| Reverser method |
Synchro shuttle |
| Gear change (FR × RR) |
F12 × R12 |
Tires
| Options |
Agriculture, Industrial, or Turf |
Rear PTO
| Type |
Live PTO (6 spline shaft) |
| Speeds |
540/1000 |
Hydraulic System
| Type |
Position |
| Hitch |
3 point hitch; Category 1 |
| Lift Capacity at Lift Point |
2140 lbs; |
| Pump capacity |
8.2 gallons/minute |
BL10A Loader
BL10A Loader Specifications
| Maximum lift height |
94.09” |
| Clearance with Attachment level |
87.80” |
| Clearance with Attachment dumped |
69.68” |
| Reach at maximum height |
23.43” |
| Maximum dump height |
60° |
| Reach with Attachment on ground |
60.43” |
| Attachment rollback angle |
35° |
| Digging depth below grade |
5.31” |
| Overall height in Carry Position |
42.71” |
| Depth of Attachment (to inner shell) |
21.45” |
| Height of Attachment |
19.29” |
| Depth of Attachment (to pivot pin) |
26.00” |
| Lift capacity at full height (at pivot pin) |
1,675 lbs. |
| Breakout Force at Ground Level 500mm forward to pivot pin |
2,315 lbs. |
| Relief valve setting (Loader Control Valve) |
1,990 psi |
| Rated flow (Tractor system) |
8.24 gpm |
| Attachment used for specification |
6 ft.³ |